Car Safety - Child Seat Belt Adjuster and related Products

Autosafe Products
12 Colas Mews
London, NW6 4LH

Tel: 020 7625 4702
Fax: 020 7372 9428

Email: info@autosafeproducts.co.uk

Height Adjuster Fitting instructions

AUTOSAFE HEIGHT ADJUSTER

Fitting Instructions

Important:The autosafe Height Adjuster has been crash tested to ECE R44/03 and is proven to reduce injuries and significanlty improve child safety, when used with an approved seat belt. The product should only be used in conjunction with an approved seat belt. Please follow instructions carefully.

Warning: Do not place children in front seats equipped with front air bags. This product should only be used by adults/children over 4 years or 18kg. The seat belt should run freely when used in conjuction with the adjuster clip. It is recommended that you use a booster seat for small/young children in conjunction with the Height Adjuster.

Fitting Strap to Seat

	* Click on image to zoom view
1. Feed end of strap through base of car seat.	2. Place strap over car seat with locking clip at top.

3. Press locking clip lever and feed lower part of strap through opening.	4. Slightly tighten strap until seat cushion begins to depress

5. Feed loose tail end through tidy clip. Seat belt height adjuster is now ready for

Instructions On Use

1. When child is seated, clip belt into buckle.	2. Ensure lap part of seat belt is comfortably tight.

3. Feed shoulder part of seat belt through adjuster clip opening.	4. Adjust height of seat belt, this is done bye using finger grips and sliding up or down.

5. Ensure that seat belt clip is aligned at same angle as seat belt.	6. Ensure seat belt runs freely through adjuster clip.

Instructions for cleaning:
Clean with a damp cloth. Do not use detergents.

Call us now on 020 7625 4702 or Email us